| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Brake | Section: Brake (rear) | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM0000018DQ00AX |
| Title: BRAKE (REAR): REAR BRAKE: DISASSEMBLY (2008 Sequoia) | ||
DISASSEMBLY
1. REMOVE REAR DISC BRAKE BLEEDER PLUG CAP
2. REMOVE REAR DISC BRAKE BLEEDER PLUG
3. REMOVE CYLINDER BOOT
|
(a) Using a screwdriver, remove the cylinder boot from the cylinder. HINT:
Tape the screwdriver tip before use. |
4. REMOVE REAR DISC BRAKE PISTON
|
(a) Place a piece of cloth or a similar object between the piston and cylinder. |
(b) Use compressed air to remove the piston from the cylinder.
CAUTION:
Do not place your fingers in front of the piston when using compressed air.
5. REMOVE PISTON SEAL
|
(a) Using a screwdriver, remove the piston seal from the cylinder. NOTICE:
Do not damage the inner cylinder and cylinder groove. HINT:
Tape the screwdriver tip before use. |
|
|